Honeycomb activated carbon is made of high-quality coal activated carbon, pressed by bee mold and fired at high temperature.
purpose
Honeycomb activated carbon can be widely used in various gas purification equipment and waste gas treatment projects.
Practice has proved that the purification effect is better than ordinary. The pollutants that can be removed by honeycomb
activated carbon to varying degrees include: nitrogen oxide, carbon tetrachloride, chlorine, benzene, formaldehyde, acetone,
ethanol, ether, methanol, acetic acid, ethyl ester, styrene, phosgene, odor gas and other acid-base gases.
characteristic
Honeycomb activated carbon is widely used in air pollution control because of its large specific surface area, low through-hole
resistance, developed micropores, high adsorption capacity and long service life. The honeycomb activated carbon adsorption method
is selected, that is, the exhaust gas contacts with porous activated carbon with a large surface, and the pollutants in the
exhaust gas are adsorbed, thus playing a purification role.
Directions for use
It can be used directly or put into the purification cabinet and adsorption bed. If the concentration of waste
gas is high and the emissions are large, two purification cabinets and adsorption bed can be used alternately. In the process of
use, try to avoid too high temperature, too high temperature will reduce the adsorption capacity, adsorption capacity decreases
with the temperature rise; At the same time to avoid high dust content and oil mist, because tar dust mist will plug activated
carbon micropores, increase resistance, reduce the adsorption effect, if the use of the environment contains a lot of dust and
tar, should be installed before the dust filter to achieve the best use effect and the longest service life.
|
Main ingredients
|
Activated carbon
|
Normal compressive strength
|
Greater than 0.8MPa
|
Common specifications
|
50*50*100mm、100*100*100mm
|
Service temperature
|
Less than 400 degrees Celsius
|
Pore density
|
100 holes / square inch, 150 holes / square inch
|
Empty tower wind speed
|
0.8 m / S
|
Specific surface area
|
More than 700 square grams
|
Appearance
|
The surface of the product is flat without cracks
|
Reviews
There are no reviews yet.